Table of Contents
Advertisement
Winder
3. Turn the winder flap screw (2):
4. Put the completely filled bobbin onto the winder.
5. Fold the winder flap (3) upwards as far as it will go to the thread.
Figure 53: Setting the winder run and automatic stop
(5) - Engaging clamp
(6) - Winder wheel
(7) - Engaging clamp setscrew
Setting the winder run
6. Loosen the switch cam setscrew (8).
7. Set the switch cam (9) such that it is just contacting the leaf spring (10)
8. Set the switch cam (9) such that the winder flap (3) has no axial play.
9. Tighten the switch cam setscrew (8).
Service manual H867 Version 00.0 - 08/2013
• Arms closer together: Turn the screw to the left
• Arms further apart from each other: Turn the screw to the right
when the engaging clamp (5) has engaged in the locking disc.
(8) - Switch cam setscrew
(9) - Switch cam
(10) - Leaf spring
67
Advertisement
Table of Contents
