Toshiba TS3000 Series Instruction Manual page 3

series Robot Controller
About the organization of the TS series robot controller instruction manuals
The TS series robot controller instruction manuals have been published in parts
according to the application and purpose, and the name and outline of each manual are
as follows:
[Safety Manual]
This manual contains the important information to use the robot safety and correctly.
Be sure to read through and understand this manual before operating the robot.
Also, strictly observe the descriptions made there.
[Startup Manual]
This manual describes the procedures covering from power ON of the robot after
installation to robot operation by manual guide. Those who use the TS series robot
controller for the first time should read through this manual.
[Operator s Manual]
This manual describes the TS series robot controller operating procedures. Read
through this manual before operating the robot, and refer to it as necessary.
[Robot Language Manual]
This manual describes the robot language called "SCOL". When you have to
create a program based on this language, read through the manual.
[Interface Manual]
This manual describes the external signals for the robot. Concerning the interface
conditions between the robot and peripheral equipment, specifications, timing, etc.,
refer to the manual when necessary.
[Installation & Transport Manual]
This manual describes the transport, unpacking and installation of the robot and
controller. Be sure to read through this manual before unpacking the shipment
containing the robot.
[Maintenance Manual]
This manual deals with the daily and regular inspections to be made on the robot
and controller. Read through this manual to use the robot safely over long years to
come.
TP3000 OPERATOR S MANUAL
Preface
b
STE 85412