Toshiba TS3000 Series Instruction Manual page 222

series Robot Controller
Step 3: Execution of copy
Once the file name has been determined, press the [EXE] key.
Copy is executed and the file is copied to the same directory (from RAM to RAM, from
USB to USB) as that of the original file.
To cancel copying in progress, press the [ESC] key.
Cautions
 If there is no "TS3000" folder (directory) in the USB drive, the USB drive selected
in each operation will not be recognized. Before performing file operation, be sure
that there is a "TS3000" folder (directory) in the USB drive. If there is no "TS3000"
folder (directory) in the USB drive, create a "TS3000" folder.
 If the size of the copying data exceeds the memory capacity as a result of the
copy operation, an error message of "RAM file I/O error" is displayed.
TP3000 OPERATOR S MANUAL
10-6
STE 85412