Line Feed; Switch Between Insert Mode And Replace Mode - Toshiba TS3000 Series Instruction Manual

series Robot Controller
4.9

Line Feed

Functional Explanation
Executes a line feed on the PRG EDIT screen.
Operating Procedure
Step 2: Execution of line feed
Move the cursor to the position where you want to perform line feed and then press the
[EXE] key.
(When line feed is executed at the end of the line, a blank line is added.)

4.10 Switch between Insert Mode and Replace Mode

Functional Explanation
Switches between the insert mode and the replace mode to enter text. When starting
the program editor, the insert mode takes effect.
Operating Procedure
Step 1: Switching between the insert mode and the replace mode
Press the [INS] key. Each time the [INS] key is pressed, the mode changes between
the insert mode and the replace mode.
When starting the program editor, the insert mode has been selected.
TP3000
4-10
STE 85412