Setting Up Date And Time [Date] - Toshiba TS3000 Series Instruction Manual

series Robot Controller
Step 2: Editing the work time
Position the cursor on the item you want to change, and press the [EXE] key.
Edit its value on the command line.
Once the change has been determined, press the [EXE] key.
Caution
 Edit each data within the following input ranges.
Hour: 0 to 99999
Minute: 0 to 59

11.9 Setting Up Date and Time [DATE]

Functional Explanation
Displays and sets up the current date and time.
Operating Procedure
Step 1: Calling the [DATE] function
Press the [DATE] key among the utility function selection keys.
The current date and time are displayed on the DATE screen.
TP3000 OPERATOR'S MANUAL
– 11-18 –
STE 85412