Automatic Start File - Toshiba TS3000 Series Instruction Manual

series Robot Controller
Step 2: Discards the changes made and quits the program editor.
Press the [NO SAVE] key. A no-save confirmation message appears on the command
line.
Press the [EXE] key. Discard the changes made and quits the program editor.
If the [ESC] key is pressed while a confirmation message is being displayed, [NO
SAVE] is canceled and program editing can be continued.

4.15.11 Automatic Start File

Functional Explanation
Prepare a batch file named "AUTOSTR. BAT" in the controller in advance, and then
turn off/on the power to the controller.
When the power is turned on, the batch file "AUTOSTR. BAT" is started.
Creation Procedure
Step 1: Creating a batch file
Create a new batch file "AUTOSTR. BAT" by referring to Section 4.1.
Step 2: Editing a batch file
Edit the batch file in the program editor.
Enter a command that takes effect in batch processing and the name of the file that
executes that command line by line.
The following five commands take effect in batch processing.
SELECT <filename>
OVRD <override setting value> : Sets override.
TP3000
: Selects a file.
4-34
STE 85412