Toshiba TS3000 Series Instruction Manual page 250

series Robot Controller
[REORG] Screen and Key Sheet
1
Cautions
 For details of the display contents and setting, see the Maintenance Manual.
 To change the values of HOME3 and HOME4, it is necessary to unlock the
password (see Section 1.6).
 Servo ON and JOG operation are disabled during this function.
TP3000 OPERATOR'S MANUAL
3
① Indicates the origin reproducing
2
② Indicates the origin reproducing
③ Indicates the page number.
* When the [NEXT] key is pressed,
the origin reproducing positions
HOME3 and HOME4 are displayed.
Because HOME3 and HOME4 are
the initial values which are set when
shipped from the factory, they
cannot be edited in principle.
If they must be edited, it is
necessary to unlock the password.
– 11-21 –
Description of Display
position HOME1.
position HOME2.
STE 85412