Toshiba TS3000 Series Instruction Manual page 176

series Robot Controller
Step 3: Execution of changing of the speed override rate
Press the [EXE] key.
When changing of the speed override rate is executed, the changed override rate is
displayed in the OVRD field on the status bar at the bottom of the screen.
Caution
 The specified speed override rate also takes effect in test operation and external
automatic operation. Unless it is changed, the previous state is maintained.
Related Function
The speed can be limited by the external signal ("low speed command"). When this
happens, the motion speed can be specified by the user parameter. If the override
speed set exceeds this low speed, it is clamped there. The external signal (low speed
command) also takes effect in both the internal automatic mode and external automatic
mode.
TP3000
7-9
STE 85412