Real-Time Clock Setting; Eoi Remote Mounting - Toshiba vlp technology P9 ASD Installation & Operation Manual

place. This ensures the proper alignment and electrical connection of the CNX connector of the LED/LCD
display unit PCB. Gently hold the display in place while securing the Phillips mounting screw.
If improperly seated, the periphery of the LED/LCD display unit will not be flush with the EOI surface
and the unit will not function properly.

Real-Time Clock Setting

The Real-Time Clock of the P9 ASD provides a time stamp of the trip history, Time-Based Alternation
control timing, and other real-time event control functions.
The Real-Time Clock must be set in order to use the real-time monitoring and control functions of the
ASD (trip history dates, Time-Based Alternation, etc.).
Set the Real-Time Clock from Program\Utilities\Real-Time Clock Setup. Scroll to select the field to be
changed. Press Enter to enter the Edit mode. Turn the rotary encoder to change the value. Once set, press
Escape to exit without accepting the change, or press Enter to accept the change.
Continue to subsequent fields of the Real-Time Clock Setup screen and repeat the procedure until done.

EOI Remote Mounting

The EOI may be mounted remotely using the optional ASD-MTG-KIT-P9. Or if operating in a NEMA 4
environment, the ASD-EOI-N4-G9 is best suited for this application. Each kit contains all of the
hardware required to mount the EOI of the HX7+ ASD remotely.
System operation and EOI operation while using the remotely-mounted EOI are the same as with the
ASD-mounted configuration.
See the section titled
remotely.
P9 ASD Installation and Operation Manual
EOI Remote Mounting on pg. 33 for more information on mounting the EOI
29