Time Setting - Toshiba V Series User Manual

7.4 Time Setting

The EN311 internal time is set from the S controller. This information is used as the time
information in the EN311 event trace.
Time set request (using the USEND_T instruction)
This request sets the EN311 internal time from a user program. This information is used
as the time information in the EN311 event trace(read out using the RAS information
readout request).
(1) Request command structure and error status
<Request command>
CMD
CMD+1
CMD+2
CMD+3
CMD+4
<Error status>
STATUS
Error status examples
Error status number
-5001(16#EC77)
2831(16#B73)
2832(16#B74)
2833(16#B75)
2834(16#B76)
2835(16#B77)
2836(16#B78)
(2) Time specification format
• Enter the year, month, day, hour, minute, and second as BCD codes.
The date May 4, 2000 14:30:00 would be entered as:
6F8C0904
F
Destination EN311 module slot number
Command (16#0318)
Month
Hour
Second
F
=0: Normal completion, ± 0: Error status
Command type error
Format error: Year
Format error: Month
Format error: Day
Format error: Hour
Format error: Minute
Format error: Second
A+2
A+3
A+4
0
Year
Day
Minute
0
Description
16#0500
16#1404
16#0030
7.4 Time Setting
7
167