ARM DSTREAM-XT Getting Started Manual page 5

DSTREAM-XT Getting Started Guide Document ID: 102443_1.0_00_en
Version 1.0
During the lifetime of the product, you are advised to:
• Inspect the product regularly to ensure that it is in good working order.
• Ensure that the product is free from dust and debris that might cause damage.
• Clean the product with an air duster when necessary.
• Power down the system when not in use.
• Observe ESD precautions when handling the product.
The product can radiate Radio Frequency Interference (RFI) or Electromagnetic Interference
(EMI) and might cause harmful interference to radio communications. There is no guarantee that
interference cannot occur in a particular installation. If you suspect that this equipment is causing
interference to other equipment, you are encouraged to try to correct the interference by one or
more of the following measures:
• Ensure attached cables do not lie across any sensitive equipment.
• Increase the distance between the product and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the product is
connected.
• Consult Arm for help.
The product can be sensitive to Radio Frequency Interference (RFI) or Electromagnetic Interference
(EMI) which might cause incorrect operation of the product:
• Avoid using the product near sources of EMI.
• Never use the product in Safety-Critical-Systems (SCS), or Life-Critical-Systems (LCS).
Arm recommends that, wherever possible, shielded interface cables be used.
Copyright © 2021 Arm Limited (or its affiliates). All rights reserved.
Non-Confidential
Page 5 of 38