ARM DSTREAM-XT Getting Started Manual page 38

DSTREAM-XT Getting Started Guide
• Update the firmware of your DSTREAM-XT system. At the end of a firmware update, the
DSTREAM-XT system restarts.
To update the firmware of a DSTREAM-XT system, either use:
◦ The Arm Development Studio IDE. For instructions, see
firmware.
◦ The dbghw_batchupdater utility on the command line. For instructions, see the
Updating multiple debug hardware units
Related information
Update the DSTREAM-XT system firmware
Updating multiple debug hardware units
Copyright © 2021 Arm Limited (or its affiliates). All rights reserved.
topic in the Arm Development Studio User Guide.
on page 31
Non-Confidential
Document ID: 102443_1.0_00_en
Update the DSTREAM-XT system
Version 1.0
Troubleshooting
Page 38 of 38