Update The Dstream-Xt System Firmware - ARM DSTREAM-XT Getting Started Manual

Table of Contents

Advertisement

DSTREAM-XT Getting Started Guide
If your DSTREAM-XT system boot sequence does not follow this sequence, see
Troubleshooting.
Related information
Connect and power up the DSTREAM-XT system
Restore a DSTREAM-XT system
3.5 Update the DSTREAM-XT system firmware
The DSTREAM-XT system firmware, provided with Arm
DSTREAM-ST operating system, templates that define how the debug hardware communicates
with target devices, and configuration files for add-on probes, such as the XT probe.
Before you begin
• Ensure you connect and power-up the DSTREAM-XT system so the firmware on both the
DSTREAM-ST unit and XT probe is updated simultaneously. For more information, see
and power up the DSTREAM-XT
• You must also ensure that Arm Development Studio 2021.1 or later is installed on the host
computer.
• In Arm Development Studio, the latest firmware files are available at:
<Arm_Development_Studio_install_directory>/sw/debughw/
firmware/
• You must use firmware version 7.6 or later to detect the XT probe.
Procedure
1. Open the
Debug Hardware Firmware Installer
Studio, select Window > Show View > Debug Hardware Firmware Installer.
2. For the Debug Hardware field, click Browse... and select your debug unit, then click Connect.
You can view the currently installed firmware version, the auto-selected new firmware file, and
the new firmware details.
3. Either accept the auto-selected firmware update file, or browse and select a different firmware
update file:
• To accept the auto-selected firmware update file, click Install.
• To select a different firmware update file, in Select Firmware Update File, click Browse,
select your firmware update file, and click Open. Then click Install.
Results
The firmware is now updated on both the DSTREAM-ST unit and XT probe.
Copyright © 2021 Arm Limited (or its affiliates). All rights reserved.
on page 26
on page 36
system.
view. From the main menu in Arm Development
Non-Confidential
Document ID: 102443_1.0_00_en
Set up your DSTREAM-XT system
®
Development Studio, contains the
Version 1.0
Connect
Page 31 of 38

Advertisement

Table of Contents
loading

Table of Contents