ARM DSTREAM-XT Getting Started Manual page 27

DSTREAM-XT Getting Started Guide
• You must have the following items from the
◦ The DSTREAM-ST unit.
◦ The XT probe and the 60-way AUX cable.
◦ The power supply unit, dual DC power cable, and the mains cable that is appropriate for
your region.
◦ To connect the DSTREAM-ST unit to the host computer or the network, you need either:
▪ The USB cable, to connect the DSTREAM-ST unit directly to the host computer using
the USB 3.0 port.
▪ The Ethernet cable, to connect the DSTREAM-ST unit to the network.
◦ To connect DSTREAM-XT to the target hardware, you need a target-compatible cable/
adapter. For a list of supplied cables and adapters, see
• If DSTREAM-XT or the target hardware are not earthed, potential differences
can occur between them. During connection, potential differences cause
unwanted pulses in the debug interface. This might cause unwanted resets to
occur. See
• Ensure the target connector has a compatible pinout before use. Incorrect
connections might damage the debug or target hardware.
Procedure
1. Connect the DSTREAM-ST unit, the XT probe, and the power supply unit:
a) Connect the DSTREAM-ST unit to the XT probe using the 60-way AUX cable.
b) Attach the Power Supply Unit (PSU) to the PSU-adapter end of the split power supply
cable.
c) Attach one end of the split power supply cable to the DSTREAM-ST unit, and attach the
other end to the XT probe.
2. Connect the DSTREAM-ST unit to the host computer:
• If you are connecting using the USB port, connect the DSTREAM-ST unit to the host
computer using the supplied USB 3.0 cable.
The USB drivers are provided with Arm Development Studio. For more
information, see the USB driver installation topics:
for the DSTREAM-XT system on Windows
DSTREAM-XT system on
• If you are connecting across an Ethernet network, connect the DSTREAM-ST unit to the
local network using the supplied Ethernet cable.
Copyright © 2021 Arm Limited (or its affiliates). All rights reserved.
Arm DSTREAM-XT box
Hot-plug the debug cable
Linux.
Non-Confidential
Document ID: 102443_1.0_00_en
Set up your DSTREAM-XT system
contents:
Arm DSTREAM-XT box
for further details.
Install the USB drivers
or Install the USB drivers for the
Version 1.0
contents.
Page 27 of 38