Coolant Drain / Fill - Polaris RZR XP 1000 2017 Service Manual

Table of Contents

COOLANT DRAIN / FILL

1. Remove the front hood.

Never drain the coolant when the engine and radiator

are warm or hot. Hot coolant can cause severe burns.

Allow engine and radiator to cool.

2. Slowly remove the pressure cap to relieve any

cooling system pressure.

3. Place a suitable drain pan underneath the radiator

fitting on the front right side of the vehicle.

4. Drain the coolant from the radiator by removing the

lower coolant hose from the radiator as shown

5. Allow coolant to drain completely. Properly dispose

of the used coolant.

6. Reinstall coolant hose and reposition the spring

7. Remove the pressure cap. Using a funnel, add the

recommended coolant to the top of the filler neck and

fill the recovery bottle to the MAX level.

8. Refer to Cooling System Bleeding Procedure, page

Recommended Coolant:

Polaris 50/50 Extended Life Anti-freeze

2880514 (quart)

2880513 (gallon)

9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual