3. Remove the three fasteners
pedal assembly to the frame support.
4. Remove the protective shield
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
e
retaining the throttle
5. Remove the pedal assembly from the vehicle.
6. Place the throttle pedal assembly and protective
7. Torque the three mounting bolts to specification and
8. Manually cycle the throttle pedal to verify the throttle
9. Connect the negative (-) battery cable and install the
r
.
PPS Installation
shield on the mounting studs and loosely install the
three fasteners.
connect the PPS harness connection.
TORQUE
Throttle Pedal Mounting fasteners:
18 ft-lb (24 Nm)
pedal moves freely.
drivers seat.
FUEL SYSTEM
4
4.43