Polaris RZR XP 1000 2017 Service Manual page 356

Table of Contents

5. Carefully install the rollers

assembly while installing the assembly into the

clutch housing.

Install roll cage so that the ring gear grooves line up

with the roll cage windows (see below). Be sure role

cage top groove is facing upward.

6. Install the torsion spring

the spring around the dowel pin on the ring gear.

into the roll cage

by wrapping each leg of

7. Align spring retainer dowel pin

and install the retainer on top of the

torsion spring.

8. Check the action of the torsion spring by rotating in

both directions to ensure the spring and retainer are

installed properly.

9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual

with ring gear

Troubleshooting