Polaris RZR XP 1000 2017 Service Manual page 391

Table of Contents

8. Using a 1" open-end wrench or adjustable wrench,

loosen and remove the bearing cap from the shock

9. Slowly lift up and remove the shock rod assembly

from the shock body.

9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual

STEERING / SUSPENSION

10. Remove and properly dispose of the oil from the

Insert the IFP Tool (PS-45908) and cycle the Internal

Floating Piston (IFP) a few times to purge the shock oil

from the reservoir.

11. Remove the floating piston from the shock reservoir

using the IFP Tool (PS-45908).

12. Clean and inspect ALL parts and replace as needed.

Seal kits are available and should be installed at this

time if seals or O-rings are damaged or worn.

13. Use the appropriate shock rod holding tool and a

vise to mount the shock rod vertically with the

threaded end upward.

Front Shock Rod Holding Tool: 2872429

Rear Shock Rod Holding Tool: PU-50931

Troubleshooting