Polaris RZR XP 1000 2017 Service Manual page 139

2. Remove the cam chain tensioner
cylinder. Replace the sealing washer or gasket
upon reassembly.
NOTE
The engine may have a hydraulic (first image) or
mechanical (second image) cam chain tensioner.
3. Remove the two bolts retaining the fixed cam chain
r
guide and remove the assembly from the engine.
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
w
from the 4. Remove the remaining two bolts that retain the front
e
camshaft carrier
camshafts.
5. Hold camshafts
remove the top bolt
i
.
6. Rotate the engine using the flywheel and remove the
remaining bolt from each camshaft sprocket.
7. Lift the chain and sprockets off the camshafts to
allow each sprocket to be removed.
8. Using a paperclip or other tool, hold cam chain up to
keep it from falling down into the crankcase.
The crankcase has a built-in lower guide to prevent the
chain from falling off the crankshaft.
ENGINE / COOLING SYSTEM
t
and carefully lift the carrier off the
y
with an open-end wrench, and
u
from the camshaft sprockets
NOTE
3
3.33