Polaris RZR XP 1000 2017 Service Manual page 304

TRANSMISSION
13. Remove the shift shaft rail
transmission housing as an assembly.
14. Remove the rear output shaft assembly
underneath the gear or by tapping the shaft from the
opposite side.
15. Remove the input shaft
and idler gear shaft assembly
transmission housing by pulling both assemblies
straight up.
16. Place the gear cluster assembly on a clean surface
for inspection. If disassembly is required, refer to
"Gear Cluster Disassembly".
6.16
j
and shift forks from the
1 (
by lifting
2)
, gear cluster assembly
2@
from the
17. Using a 5 mm Allen wrench, remove the screws that
secure the pinion shaft assembly
shaft assembly straight up to remove it from the
housing. Note the longer screw
snorkel tube.
18. Remove all seals from the gearcase halves and clean
the cases in preparation for assembly.
Gear Cluster Disassembly
2!
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
2#
. Lift the pinion
2 $
that locks the
© Copyright Polaris Industries Inc.