Polaris RZR XP 1000 2017 Service Manual page 283

4. Spin the compressor down until it just starts to
contact the helix cover. Remove the four screws
that secure the cam (helix) assembly using a T25
Torx driver.
CAUTION
The helix cover is loaded by the spring. Not using a
proper compressor may result in personal injury or
damage to the clutch.
5. Remove the universal clutch compressor.
6. Note the alignment of the X's
moveable sheave. Remove the spider assembly
and spring.
NOTE
Spring is compression only and has no torsional wind.
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
7. Remove the E-clips
q
rollers
8. Press out the spring pins
w
on the spider and
e
9. Pull out the clutch slider pins
r t
, washers
y
. Inspect the rollers for wear; replace if worn.
u
in the inner sheave.
i
and sliders
PVT SYSTEM
, and the clutch
5
o
.
5.27