Polaris RZR XP 1000 2017 Service Manual page 285

Table of Contents

6. Align the X's

on the spider and moveable sheave.

7. Install the universal clutch compressor on the clutch

and compress the helix cover.

The helix cover is loaded by the spring. Not using a

proper compressor may result in personal injury or

damage to the clutch.

8. Align the marks previously made on the helix cover

and moveable sheave. Install the helix/cover and the

four fasteners

. Torque fasteners to specification.

Helix Retaining Screws:

48 in-lb (5 Nm)

9. Once back together, verify the grease / tape marks

made during disassembly are properly aligned.

10. Install the drive clutch on the vehicle. See PVT

Assembly, page 5.11

9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual

Troubleshooting