4. Adjust the door until the front latch is centered both
vertically and horizontally in the striker bracket, as
shown.
NOTE
If it is difficult to center vertically and horizontally, loosen
striker assembly fasteners
Torque striker fasteners once aligned.
TORQUE
Striker Fasteners:
8 ft-lb (11 Nm)
5. Holding the door in position, tighten the top hinge
e
bracket M8 fasteners
r
. Torque to specification.
TORQUE
Door Hinge Fasteners:
8 ft-lb (11 Nm)
6. Install the door panel onto the door frame. Torque
fasteners to specification.
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
w
for extra adjustment.
and then bottom fasteners
BODY / FRAME
TORQUE
Door Panel Fasteners:
22 in-lb (2 Nm)
10
10.29