Polaris RZR XP 1000 2017 Service Manual page 300

TRANSMISSION
HOLE YEAR
5 2015-18
i.e. 2015 RZR 900 uses the holes marked with a 4
7. Loosen the two bolts retaining the transmission
coupler bracket to the engine on the right side.
8. Align front transmission
transmission joint bracket mounting holes on engine.
9. Loosely install the two longer bolts into left side
mounting holes and two shorter bolts with washers
into right side mounting holes.
DO NOT torque fasteners at this time.
6.12
VEHICLE DESCRIPTION
RANGER Diesel
mounting holes
NOTE
10. Torque left side mounting bolts to specification in
sequence.
11. Torque right side mounting bolts to specification using
the numbered sequence shown.
with
Engine / Transmission Mounting Bolts:
Step 1-2: 64 ft-lb (87 Nm) Step 3: 5 ft-lb (7 Nm) Step
12. Remove the clutch center distance tool.
13. Remove the spacer or support between the vehicle
frame and engine.
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
TORQUE
4-7: 44 ft-lb (60 Nm)
© Copyright Polaris Industries Inc.