Polaris RZR XP 1000 2017 Service Manual page 172

ENGINE / COOLING SYSTEM
6. Apply Polaris PS-4 engine oil to each rod bearing
r
journal and main bearing journal
y
7. Loop cam chain and oil pump drive chain
crankshaft sprockets.
8. Apply Polaris PS-4 engine oil to the new crankshaft
u
oil seal and install the seal on the PTO end of the
crankshaft.
9. Carefully lower the crankshaft into upper crankcase.
Guide connecting rods onto the rod journals of
crankshaft as necessary.
10. Adjust the PTO crankshaft seal so it rests properly in
the upper crankcase.
3.66
11. Clean bolt hole threads in connecting rod to remove
t
of crankshaft.
12. Install matching rod cap on connecting rod with 3
i
over
13. Install new bolts
14. Torque connecting rod bolts to specification.
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
all oil.
digit serial number stampings aligned
s
and tighten evenly until snug.
TORQUE
Connecting Rod Bolts:
Step 1: 9 ft-lbs (12 Nm)
Step 2: 13 ft-lb (18 Nm)
Step 3: Tighten add'n 105°
w e
& .
© Copyright Polaris Industries Inc.