Polaris RZR XP 1000 2017 Service Manual page 119

Table of Contents

8. Lift the cover from the housing and remove the

Thermostat has a pop-off relief to allow the bypass

system to operate until thermostat opens.

9. Install a new thermostat with the bleed hole

positioned closest to the engine.

Image shown above is with engine removed for clarity.

10. Reverse this procedure for installation. Torque

thermostat cover bolts to specification.

Thermostat Cover Bolts:

7 ft-lb (10 Nm)

11. Be sure to properly fill and bleed cooling system as

outlined in this chapter.

9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual

ENGINE / COOLING SYSTEM

Troubleshooting