Polaris RZR XP 1000 2017 Service Manual page 132

ENGINE / COOLING SYSTEM
22. Use an overhead or portable engine hoist and
suitable engine straps to secure engine in its current
position.
23. Remove the four rear mounting bolts
the rear of the engine to the transmission.
It is not necessary to remove the bolts that retain the
k
bracket to the transmission.
24. Remove the four front engine mounting bolts
1(
nuts .
25. With the help of an assistant and the engine hoist,
raise the engine vertically out of the vehicle frame.
Have an assistant help guide the engine in and out of
the vehicle while using an engine hoist to prevent
personal injury or damage to vehicle components.
3.26
j
that attach
NOTE
NOTE
26. Remove the starter motor bolts
from the engine.
27. Remove the six transmission joint bracket bolts
and transmission joint bracket
28. Install the engine stand adapter (PU-50562) onto the
engine where the starter motor was located.
29. Select the proper engine stand sleeve adapter and
install it onto the engine stand adapter.
• Sleeve adapter for a 2" bore engine stand:
• (PU-50625)
l
and
• Sleeve adapter for a 2.375" bore engine stand:
• (PW-47054)
30. Place engine onto the engine stand (PU- 50624) for
service.
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
2)
and starter motor
2@
from the engine.
© Copyright Polaris Industries Inc.
2!