Toyota 2VZ-FE Manual page 59

ENGINE MECHANICAL – Cylinder Heads
(b) Install a new gasket and the exhaust manifold with six
new nuts, Uniformly tighten the nuts in several passes.
Torque: 400 kg–cm (29 ft–lb, 39 N m)
(c) Install the outside heat insulator with the three nuts.
(d) Connect the oxygen sensor connector.
13. INSTALL LH EXHAUST MANIFOLD
(a) Install a new gasket and the exhaust manifold with six
new nuts, Uniformly tighten the nuts in several passes.
Torque: 400 kg–cm (29 ft–lb, 39 N m)
(b) Install the heat insulator with the two nuts.
14. INSTALL INTAKE MANIFOLD
(a) Install two new gaskets and the intake manifold with the
eight bolts and four nuts, Uniformly tighten the bolts and
nuts in several passes.
Torque: 180 kg–cm (13 ft–lb, 18 N m)
EM-57