Table of Contents
Advertisement
EFI SYSTEM
–
Air Induction System (Throttle Body)
INSTALLATION OF THROTTLE BODY
1.
INSTALL THROTTLE BODY
(a) Install a new gasket and the throttle body with the four
(M/T) or three (A/T) bolts.
Torque:
130 kg–cm (9 ft–lb, 13 N m)
(b) (A/T)
Install the throttle cable bracket with the two bolts.
Torque:
130 kg–cm (9 ft–lb, 13 N m)
(c) Connect the following hoses:
PCV hose
Water by–pass hoses
Emission control vacuum hoses
2.
CONNECT THROTTLE POSITION SENSOR CONNECTOR
3.
INSTALL AIR CLEANER CAP, AIR FLOW METER AND AIR
CLEANER HOSE (See step 15 or page FI–34)
4.
CONNECT ACCELERATOR CABLE, AND ADJUST IT
5.
(A/T)
CONNECT THROTTLE CABLE, AND ADJUST IT
6.
CONNECT CABLE TO NEGATIVE TERMINAL OF
BATTERY
7.
FILL WITH ENGINE COOLANT (See page CO–5)
FI–43
Hide quick links:
Advertisement
Table of Contents
