Table of Contents
Advertisement
ENGINE MECHANICAL – Timing Belt
TIMING BELT
COMPONENTS
REMOVAL OF TIMING BELT
1.
DISCONNECT CABLE FROM NEGATIVE TERMINAL OF
BATTERY
CAUTION: Work must be started after approx. 20 se-
conds or longer from the time the ignition switch is
turned to the "LOCK" position and the negative (–) termi-
nal cable is disconnected from the battery.
2.
REMOVE SUSPENSION UPPER BRACE
(See step 7 on page EM–63)
3.
REMOVE CRUISE CONTROL ACTUATOR
(See step 15 on page EM–64)
4.
REMOVE PS OIL RESERVOIR TANK WITHOUT
DISCONNECTING HOSES (See step 36 on page EM–67)
5.
REMOVE RH FRONT WHEEL
6.
REMOVE ALTERNATOR DRIVE BELT
7.
REMOVE RH FENDER APRON SEAL
8.
REMOVE PS DRIVE BELT
EM-15
Hide quick links:
Advertisement
Table of Contents
