Toyota 2VZ-FE Manual page 214

LUBRICATION SYSTEM –
9. REMOVE STIFFENER PLATE
Remove the two bolts and stiffener plate.
10. REMOVE OIL PAN
(a) Remove the dipstick.
(b) Remove the fifteen bolts and four nuts.
(c) Insert the blade of SST between the cylinder block and
oil pan, cut off applied sealer and remove the oil pan.
SST 09032–00100
NOTICE: Be careful not to damage the flanges of the oil
pan and baffle plate.
11. REMOVE OIL PAN BAFFLE PLATE
Insert the blade of SST between the cylinder block and baffle
plate, cut off applied sealer and remove the baffle plate.
SST 09032–00100
NOTICE:
Do not use SST for the oil pump body side and rear oil
seal retainer.
Be careful not to damage the baffle plate flange.
12. REMOVE OIL STRAINER
Remove the bolt, two nuts, oil strainer and gasket.
Oil Pump
LU–9