Table of Contents
Advertisement
FI–26
EFI SYSTEM
–
Fuel System (Fuel Pressure Regulator)
INSTALLATION OF FUEL PRESSURE
REGULATOR
1.
INSTALL FUEL PRESSURE REGULATOR
(a) Fully loosen the lock nut of the pressure regulator.
(b) Apply a light coat of gasoline to a new O–ring, and install
it to the pressure regulator.
(c) Thrust the pressure regulator completely into the
delivery pipe by hand.
(d) Turn the pressure regulator counterclockwise until the
vacuum pipe faces in the direction indicated in the
figure.
(e) Tighten the lock nut.
Torque:
330 kg – cm (24 ft–lb, 32 N m)
2.
CONNECT FUEL RETURN HOSE
3.
CONNECT VACUUM SENSING HOSE
4.
CHECK FOR FUEL LEAKAGE (See page FI–14)
Hide quick links:
Advertisement
Table of Contents
