Table of Contents
Advertisement
IG–10
IGNITION SYSTEM
–
Distributor
DISTRIBUTOR
COMPONENTS
REMOVAL OF DISTRIBUTOR
1.
REMOVE UPPER BRACE
2.
REMOVE AIR CLEANER CAP, AIR FLOW METER AND
AIR CLEANER HOSE
(a) Disconnect the air flow meter connector.
(b) Disconnect the air hoses.
(c) Loosen the air cleaner hose clamp bolt.
(d) Disconnect the air cleaner cap clips.
(e) Remove the air cleaner cap and air flow meter together
with air cleaner hose.
3.
DISCONNECT
DISTRIBUTOR CAP
4.
DISCONNECT DISTRIBUTOR CONNECTOR
5.
REMOVE DISTRIBUTOR
Remove the two hold–down bolts, and pull out the distributor.
Remove the O–ring.
HIGH–TENSION
CORDS
FROM
Hide quick links:
Advertisement
Table of Contents
