Table of Contents
Advertisement
EM-36
ENGINE MECHANICAL – Cylinder Heads
HINT: Arrange the bearing caps incorrect order.
35. DISASSEMBLE EXHAUST CAMSHAFTS
(a) Mount the hexagonal wrench head portion of the
camshaft in a vise.
NOTICE: Be careful not to damage the camshaft.
(b) Insert a service bolt (A) into the service hole of the
camshaft sub–gear.
(c) Using a screwdriver, turn the sub–gear clockwise, and
remove the service bolt (B).
NOTICE: Be careful not to damage the camshaft.
(d) Using snap ring pliers, remove the snap ring.
(e) Remove the following parts:
(1) Wave washer
(2) Camshaft sub–gear
(3) Camshaft gear spring
HINT: Arrange the camshaft sub–gears and gear springs
(RH and LH).
Hide quick links:
Advertisement
Table of Contents
