Toyota 2VZ-FE Manual page 235

IG–12
IGNITION SYSTEM – Distributor
(b) (Ex. Center Cord)
Align the spline of the distributor cap with the spline groove
of the holder, and slide the holder.
NOTICE: Check that the holder is correctly installed to
the grommet and distributor cap as shown in the illustra-
tion.
(c) Check that the claw of the holder is engaged by lightly
pulling the holder.
(d) (Center Cord)
Insert the grommet and holder together.
(e) Connect the high–tension cords as shown in the
illustration.
4. CONNECT DISTRIBUTOR CONNECTOR
5. INSTALL AIR CLEANER CAP, AIR FLOW METER AND AIR
CLEANER HOSE
(a) Connect the air cleaner hose, and install the air cleaner
cap and air flow meter with the four clips.
(b) Tighten the air cleaner hose clamp bolt.
(c) Connect the air hoses.
(d) Connect the air flow meter connector.
6. INSTALL UPPER BRACE