Table of Contents
Advertisement
B
External Connections
This appendix describes the instrument's external connections.
Contents
Topic
External wiring and vacuum connections
Connecting the oil-filled roughing pump
Connecting the oil-free roughing pump
Connecting to the nitrogen gas supply
Connecting the nitrogen exhaust line
Connecting the liquid waste line
Connecting the workstation
Connecting Ethernet cables
I/O signal connectors
Connecting to the electricity source
The instrument is heavy. To avoid injury, Waters
Warning:
recommends that the instrument be lifted using suitable
machinery and the supplied harness.
Caution:
• Contact Waters Technical Service before moving the
instrument.
• If you must transport the instrument, or remove it from
service, contact Waters Technical Service for recommended
cleaning, flushing, and packaging procedures.
See
"Safety and handling" on page
5-5.
Page
B-2
B-3
B-10
B-18
B-20
B-23
B-25
B-26
B-26
B-31
B-1
Advertisement
Table of Contents
