Table of Contents
Advertisement
Automatic system
test
Machine functions
Machine functions
The
pensing systems and for built-in tanks. Once the
menu has been opened, the following menu will appear on the dis-
play:
| S y s t e m | S y s t e m s p r a c h
|
|
System
Machine functions
I n s t r u m e n t s
Self-disinfection
C o n t a i n e r
Iterative programme
M I C
Fill dispensing system
O r t h o p a e d i c s
Filter maintenance
Set up dispensing system
The individual functions are started with the buttons.
During the automatic system test, the
tanks (if fitted) is performed at a specified time.
For the automatic system test, the following conditions must be met:
- The machine is switched on
- The wash cabinet is empty
- The machine door is closed
- No continuous programme is active
- No write permissions have been assigned to enable access via the
web interface
The automatic system test can be turned off in the web interface
(see "System, machine configuration, automatic system test" in the
programming manual).
menu contains service functions, e.g. for dis-
B l i n d
Adjust conductivity meter
B l i n d
Programme test
B l i n d
B l i n d
B l i n d
Self-disinfection
System settings
Machine functions
S P / W O R L D
L o g I n
user/
ADM
D E
GB
0 6 . 1 2 . 2 0 1 4 2 0 : 3 6
1 1 . 0 3 . 2 0 1 9 2 0 : 3 6
1 1 . 0 3 . 2 0 1 7 2 0 : 3 6
O K
of the built-in
53
Advertisement
Table of Contents
