Changing The Program Sequence; Changing The Program; Cancelling A Program; Interrupting A Program - Miele WWB 020 Operating Instructions Manual

Changing the program sequence

Changing the program

After the successful start of a program it
is no longer possible to select a
different program.
If you would like to change the
program, you have to cancel the
program.

Cancelling a program

You can cancel a program at any time
after it has started.
 Touch and hold the Start/Stop sensor
button until the time display switches
to :.
The water will be pumped away. As
soon as the  symbol on the control
panel goes out, the program has been
cancelled.
 Open the door.
Selecting a different program after
cancelling the program
 Close the door.
 Check that there is still detergent in
the dispenser drawer. Add more
detergent if necessary.
 Turn the program selector to the
program you want and start it by
touching the Start/Stop sensor
button.
36
Removing laundry after cancelling
the program
If you want to remove the laundry when
it is dripping wet:
 Open the door.
 Remove the laundry.
If you want to remove the laundry after
it has been spun (damp):
 Open the door.
 Close the door.
 Turn the program selector to Drain/
Spin.
Useful tip: Select an appropriate spin
speed.

Interrupting a program

 Turn the program selector to the
 position.
The washing machine switches off.
 To continue, turn the program
selector to the position of the wash
program that was started.
Useful tip: If  appears on the time
display, the program selector is in the
incorrect position.