Changing the program sequence
Cancelling a program
You can cancel a program at any time
after it has started.
Touch the Start/Stop sensor button.
The following will appear in the display:
Cancel Program
Touch the OK sensor button.
The suds will be pumped away. The
following will appear in the display:
Program cancelled
Wait until the door unlocks.
Pull open the door.
Remove the laundry.
If you want to select a different
program
Close the door.
Select the desired program.
Add detergent to the detergent
dispenser drawer, if necessary.
Touch the Start/Stop sensor button.
The new program will begin.
50
Interrupting a program
Turn the program selector to the
position.
The washing machine switches off.
To continue, turn the program
selector to the position of the wash
program that was started.
OK
Useful tip: If
appears in the display, the program
selector is in the incorrect position.
Changing the program
After the successful start of a program it
is no longer possible to select a
OK
different program.
Change not possible