Hardware Information; Appearance - ICP DAS USA ECAT-201x EtherCAT Slave I/O User Manual

ECAT-2011H EtherCAT Slave I/O module

2. Hardware Information

2.1 Appearance

The front panel and top panel of the ECAT module contain the I/O connector, LEDs, Ethernet Port
and power connector.
Top Panel
2. EtherCAT Interface
1. DC Power Input Connector
The "+Vs" and "GND" pins are used for the power supply applies to all types of ECAT module. The
valid power voltage range is from +10 to +30 V
The definition of "F.G." (Frame Ground): Electronic circuits are constantly vulnerable to
Electrostatic Discharge (ESD), which becomes worse in a continental climate area. ECAT module
feature a new design for the frame ground, which provides a path that bypasses ESD, resulting in
an enhanced ESD protection capability and ensuring that the module is more reliable.
2. EtherCAT Interface
ECAT modules are equipped with two RJ-45 EtherCAT Interface ports. IN is EtherCAT signal input
port that connect EtherCAT Master or EtherCAT signal output of previous EtherCAT slave module，
OUT is EtherCAT signal output that connect the next EtherCAT signal input of EtherCAT slave
module.
Copyright © 2019 ICP DAS CO., Ltd. All Rights Reserved.
1. DC Power Input
Connector
.
DC
- 6 -