ICP DAS USA ECAT-201x EtherCAT Slave I/O User Manual page 26

ECAT-2011H EtherCAT Slave I/O module

Select the "Single-ended" option from the "Enum" drop down options and then click the "OK"
Note that all AI channels will be changed to single-ended input.
button.

Double-click the "Index 80n0:05 (n = 8 to F, Enable Channel)" to enable AI channel. Here, the
AI8 (Index 8080:05) is used as an example.

Type the "1" in the "Dec:" field and then the "OK" button.
Note that AI Channels 8 to 15 (0xF) defaults setting is FALSE (0x00). If the input type is single-ended,
you must manually enable AI Channels 8 to 15 (0xF).

Figure 3-3.7
Copyright © 2019 ICP DAS CO., Ltd. All Rights Reserved.

Figure 3-3.6

- 26 -