ICP DAS USA ECAT-201x EtherCAT Slave I/O User Manual page 19

ECAT-2011H EtherCAT Slave I/O module
Figure 3-2.3
Figure 3-2.4
Figure 3-2.5
In the left-hand window, ECAT module is now shown in the TwinCAT System Manager.
In the right-hand window, the ECAT module is parameterized via "Process Data" and "CoE-Online"
tabs in the TwinCAT System Manager.
Process Data: The process data-specific settings.

CoE-Online: Settings parameter, refer to

for details.
Copyright © 2019 ICP DAS CO., Ltd. All Rights Reserved.
Click "OK" to start scanning
Click "OK" to activate the free run mode
Chapter 4 "Object Description and Parameterization"
Choose the correct network
device which is connected to
module and click "OK" button
- 19 -