ICP DAS USA ECAT-201x EtherCAT Slave I/O User Manual page 7

ECAT-2011H EtherCAT Slave I/O module
Front Panel
3. Status Indicator
Notation Color
RUN Green
Link Activity
Green
IN/OUT
4. PWR LED Indicator
Once power is supplied to the ECAT module, the system LED indicator will illuminate.
5. I/O Connector
For more detailed information regarding the pin assignments for the I/O connector, refer to
Section 2.3 "Pin Assignments".
Copyright © 2019 ICP DAS CO., Ltd. All Rights Reserved.
States Description
Off The device is in state INIT
Blinking The device is in state PRE-OPERARIONAL
Single Flash The device is in state SAFE-OPERARIONAL
On The device is in state OPERARIONAL
Off No link
Blinking Link and activity
On Link without activity
3. Status Indicator
4. PWR LED Indicator
5. I/O Connector
- 7 -