Configuring Error Detectors; Alarm Messages For Digital Inputs; Limit Messages For Counter Inputs; Limit Messages For Analog Inputs - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-314 TO-PASS® Mobile, 4 AI
Pos : 34.22 /Serie 759 ( WAGO-Software)/T O-PASS Konfig urati onssoftware/Parametrier ung/Par ametrierung Stör melder @ 3\mod_1223556121625_21.doc x @ 23732 @ 2 @ 1
7.6

Configuring Error Detectors

The TO-PASS
four recipients. The recipients are informed either directly one after another or (if
configured) after expiration of the time delay for acknowledgment. The message
is sent by the TO-PASS
sent as an e-mail, fax or voice mail. In addition, the error messages can also be
transmitted to a Web portal.
Device-dependent Function
Devices with GPRS functionality (device identifier "Web") are required to
transmit error messages to a Web portal.
Note the calculation packet size!
Please note the information given on calculation packet size in the Section
"Important Information - Rounding of Blocks for GPRS Links."
Pos : 34.23 /Serie 759 ( WAGO-Software)/T O-PASS Konfig urati onssoftware/Parametrier ung/Par ametrierung Stör melder DI @ 3\mod_1223556210625_21.doc x @ 23735 @ 3 @ 1
7.6.1

Alarm Messages for Digital Inputs

If on or off states of digital inputs are to be sent as error messages, select the
desired recipient for the respective input statuses using buttons [1] ... [4]. Click
the [Internet] button to also transmit the message to a Web portal.
In addition, you can also specify the analog values that are to be transmitted along
with the error message.
Pos : 34.24 /Serie 759 ( WAGO-Software)/T O-PASS Konfig urati onssoftware/Parametrier ung/Par ametrierung Stör melder CI @ 13\mod_1350906826660_21.doc x @ 105170 @ 3 @ 1
7.6.2

Limit Messages for Counter Inputs

If violations of upper/lower counter limits are to be sent as error messages,
activate the respective counter value and select the desired recipient using buttons
[1] ... [4].
Click the [Internet] button to also transmit the message to a Web portal.
You can also specify the analog values that are to be transmitted along with the
error message.
Pos : 34.25 /Serie 759 ( WAGO-Software)/T O-PASS Konfig urati onssoftware/Parametrier ung/Par ametrierung Stör melder AI @ 3\mod_1223556347281_21.doc x @ 23738 @ 3 @ 1
7.6.3

Limit Messages for Analog Inputs

You can specify a maximum of 2 limit values for every analog input for which
(upper/lower) limit value violations are to be sent as error messages.
Enter the desired value and select whether the error message is to be sent for
violation of the upper or lower limit value using the buttons [increasing] or
[decreasing].
Select the desired recipient for the respective limit value using the buttons [1] ...
Manual
Version 2.0.0
®
telecontrol module can transmit error messages to a maximum of
®
telecontrol module as an SMS; however, it can also be
Parameterizing 63