Gps; Figure 34: Gps Process Values; Table 39: Gps Process Values - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-314 TO-PASS® Mobile, 4 AI
Pos : 37.15 /Serie 761 (T O-PASS)/Bedienen/Bedi enen 761-31x Vis ualisi erung GPS @ 10\mod_1309350024947_21.doc x @ 74403 @ 4 @ 1
8.1.2.2

GPS

Press the [GPS] button to display the GPS process values. The process values
displayed are valid if the on-line display is green.

Figure 34: GPS process values

Following data are displayed:

Table 39: GPS process values

Process values
GPS record
Date/Time (UTC)
Latitude
Longitude
Horizontal precision
Altitude
Course over ground
Speed over ground (km/h)
Speed over ground (knots)
Evaluation (0=invalid, 2=2D, 3=3D)
Number of satellites
Press the [Display position] button to setup an internet connection and to display
the actual position on a map.
By factory default, "Google Maps" will be used.
The button is active only if a valid position has been found.
Pos : 37.16 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.0.0
Meaning
Raw data of the GPS record
In this fields, the detailed data from the
GPS record are displayed.
Operation 79