Switching To Standby - WAGO -TO-PASS 761 Manual

88 Operation
Pos : 37.39 /Serie 761 (T O-PASS)/Bedienen/Bedi enen 761-1xx/-2xx/-3xx U msc haltung Ber eitsc haft @ 3\mod_1223635053281_21.doc x @ 23868 @ 2 @ 1
8.4

Switching to Standby

Standby authorization
Switching standby on and off is only possible by subscribers whose telephone
number has been entered in the address list!
Using the "Standby" function, it is optional to change all messages sent by the
TO-PASS
takes place with simple changeover via SMS.
To do this, just send an SMS with the text "Standby1" to the TO-PASS
telecontrol modules. The TO-PASS
messages to the SMS sender. Other receivers defined in the TO-PASS
modules are no longer informed.
To switch this function off, send an SMS with the text "Standby0" to the TO-
®
PASS telecontrol modules.
The TO-PASS
of the standby function and the "STANDBY END!" at the end of the standby
function.
Pos : 37.40 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
®
telecontrol modules specifically to the respective ready state. This
®
telecontrol module sends the SMS "STANDBY OK!" at the start
761-314 TO-PASS® Mobile, 4 AI
®
telecontrol module then transmits all alarm
WAGO-TO-PASS® 761
®
®
telecontrol
Manual
Version 2.0.0