Figure 9: Snap The I/O Module Into Place (Example) - WAGO 750-652/040-000 Manual

46 Mounting
2. Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.

Figure 9: Snap the I/O Module into Place (Example)

With the I/O module snapped in place, the electrical connections for the data
contacts and power jumper contacts (if any) to the fieldbus coupler/controller or to
the previous or possibly subsequent I/O module are established.
Manual
Version 1.3.0
750-652/040-000 Serial Interface RS-232/RS-485 XTR
WAGO-I/O-SYSTEM 750 XTR