Table of Contents
Advertisement
10
Important Notes
certificate must be obtained that confirms the correct installation of the system in a
housing or switch cabinet.
The implementation of safety functions such as EMERGENCY STOP or safety
door monitoring must only be performed by the F-I/O modules within the modular
WAGO-I/O-SYSTEM 750. Only these safe F-I/O modules ensure functional safety
in accordance with the latest international standards. WAGO's interference-free
output modules can be controlled by the safety function.
2.1.4
Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. These modules
contain no parts that can be serviced or repaired by the user. The following actions
will result in the exclusion of liability on the part of WAGO Kontakttechnik GmbH &
Co. KG:
•
Repairs,
•
Changes to the hardware or software that are not described in the operating
instructions,
•
Improper use of the components.
Further details are given in the contractual agreements. Please send your request
for modified and new hardware or software configurations directly to WAGO
Kontakttechnik GmbH & Co. KG.
2.1.4.1
Disposal
2.1.4.1.1 Electrical and Electronic Equipment
Electrical and electronic equipment contain materials and substances that can be
harmful to the environment and health. Electrical and electronic equipment must
be disposed of properly after use.
WEEE 2012/19/EU applies throughout Europe. Directives and laws may vary
nationally.
Manual
Version 1.3.0
750-652/040-000 Serial Interface RS-232/RS-485 XTR
Electrical and electronic equipment may not be disposed of
with household waste. This also applies to products without
this symbol.
Environmentally friendly disposal benefits health and protects
the environment from harmful substances in electrical and
electronic equipment.
WAGO-I/O-SYSTEM 750 XTR
Advertisement
Table of Contents
