WAGO-I/O-SYSTEM 750 XTR
750-652/040-000 Serial Interface RS-232/RS-485 XTR
•
Toolbar (1),
•
parameter range (2) and
•
status bar (3).
Status reports are output in the status display in the lower area of the configuration
dialog.
8.1.2
Toolbar on the Configuration Dialog
The toolbar contains the following buttons:
Figure 18: Toolbar
Table 29: Toolbar
Button
Function
Description
Closes the active window. If you have changed
Exit
settings, you will be asked to save these values in
the I/O module.
Opens a file with saved parameters. WAGO-I/O-
Open
CHECK shows the Open File dialog.
Saves the current parameters in a file. WAGO-I/O-
Save
CHECK shows the Save File dialog.
Reads the current settings from the connected I/O
Read
module.
Writes the current parameters to the selected I/O
Write
module.
Factory
Overwrites the locally-saved configuration and
settings
parameterization with factory settings.
Configuration Sets the process image size.
Help
Opens the WAGO-I/O-CHECK online help.
Commissioning
55
Manual
Version 1.3.0