Led Indicators; Leds For Operating Status; Leds For Alarm Status - Dräger Fabius Tiro Instructions For Use Manual

Operating concept

LED indicators

There are several LED indicators on the front of
the device.

LEDs for operating status

C
– If the device is connected to the mains power
supply, the mains power LED (A) is lit.
– In addition, the standby key (B) and all keys of
the ventilation modes (C) have small LEDs that
light up when the respective mode is active.

LEDs for alarm status

Fabius has alarm LEDs that signal alarms and
indicate the alarm priority. For additional
information, see chapter ''Alarms''.
50
Alarm LEDs
B A
– Red LED (A) flashing: signals a warning
– Yellow LED (B) flashing: signals caution
– Yellow LED (B) is lighted continuously: signals
a note
Instructions for use Fabius Tiro SW 3.n
A
B